Bright Green Control dimmer for LED lighting systems. Brightness is adjusted in response to 0-10V input - PLC and Crestron compatible.
A low voltage 12V or 24V PWM LED dimmer module controlled by a universal 0-10 volt control signal. 0V on the input means the lamp/LED is fully off, 10V is fully on. The module is suitable for interfacing to any device that outputs a 0-10V or 1-10V control signal including most PLCs, lighting controllers, Crestron™ or Lutron™ device and many others.
No direct load can be put onto the master dimmer. The master can only be used to control the slaves that have the load.
|Nominal supply voltage||9 - 32V DC|
|Peak supply voltage range||5.5 - 40V|
|Maximum current output||10A|
|Continuous output power, max||120W at 12V 240W at 24V|
|Control input impedance||10 kΩ|
|PWM switching frequency||240 Hz ±3%; 0% – 100% Duty Cycle|
|Peak output current||30A|